Dettagli
One of the most classic ALIGN models, T-REX 600N nitro helicopter. In
2018, we bring you the brand new design of T-REX 600XN, it inherits the
design of T-REX 700XN featuring innovation, rigidity and lightness.
Extremely perfection and precision, the T-REX 600XN is about to excite
your inner soul to bring back your passion for nitro.
T-REX 600XN adopts the new direct to swashplate servo design, compared
to the previous generation T-REX 600N’s push-pull mode control,
provides precise and fast control! Utilizing the 550 Flybarless Rotor
Head System features an extremely low Center of Gravity (CG) design, to
effectively reduces resistance during 3D maneuvers, and increase flight
responsiveness and precision. This designed maintains a 90-degree
symmetrical angle between the Rotor Grip Arms and Linkage Rods for
superior stable flight performance. The Engineered Narrow Body Design
efficiently decrease gear abrasion and frame deformation during flight.
The T-REX 600XN maintains the proper CG, by moving the engine forward
to allow the fuel tank to be positioned in the center of the main
shaft. CG remains consistent as the fuel level changes during flight.
The new steel alloy clutch liner is durable with temperature control
designed to avoid the exploding clutch liner or a breaking clutch
housing. The steel alloy clutch liner extends the life to over a 1000
flights. The Receiver Mount provides cable and wiring protection, and
easy to maintenance by removing a few screws from the mainframe.
The new high voltage output: 6A 7.4V BEC with down / regulation system
for constant power to the CCPM server channel for receivers and servos.
Includes a built-in one-button push glow plug igniter eliminating the
hassle of using traditional electric clip plug on igniters. Also
increased external high-frequency filter capacitance to effectively
reduce the interference generated by external noise; such as high-speed
and high torque servos. The brand new DS820M/DS825M high voltage
brushless servos use brushless motors for fast speed, high torque,
superior, and efficient reaction time allows the Align 600XN precise,
fast performance. The new CNC machined aluminum case design is
aesthetically appealing while acting as a highly efficient heat sink.
The new generation of T-REX 600XN innovative design will excite your
inner soul to bring back your passion for nitro!
After performing many tests to determine the most efficient aerodynamic
canopy we are pleased to release this brand new lightweight canopy!
This ultimate canopy made of glass and carbon fiber is lightweight and
achieves best dynamic performance. Also a new unique paint scheme for
the newest member of the T-REX family.
RH60N06X
Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decrease gear abrasion and
frame deformation during flight. The Align T-REX new narrow body design
is stronger and increases flight durability.
The new direct to swashplate servo design provides precise and fast
control. Designed to maintain a 90-degree symmetrical angle between the
Rotor Grip Arms and Linkage Rods for superior and stable flight
performance.
Align Advanced Metal Swashplate strongly connects to the rotor holder
grips preventing rotor head disengagement during intense flight. Two
optional linkage ball mounting holes allow for personal selection of
resolution based on desired flight performance.
Receiver mount provides cable and wiring protection, easy to maintain
equipment by removing a few screws from the mainframe.
Maintaining the proper Center of Gravity CG is important for
helicopters. After extensive Research and Development, moving the
engine forward allowed the fuel tank to be positioned in the center of
the main shaft. This optimum location for the fuel tank permits the
600XN to maintain consistent CG as the fuel level changes during flight.
The idler pulley gear improves rotation stability and effectively
reduces the load from the gears while increasing bearing capacity. The
gears made of steel alloy are high strength and wear resistant.
CNC metal reinforcement plate and brace align with frame mounting bolts
effectively increasing the torsional strength of the mainframe. Under
extreme 3D maneuvers, you can feel the improved reinforcement to the
mainframe.
Designed specifically for helicopters, utilizing a brushless motor for
fast speed, high torque, and superior, efficient reaction time allows
the Align 600XN precise, fast performance. The brand new DS820M high
voltage brushless servo has a with a new CNC machined aluminum case.
The new aluminum case design is aesthetically appealing while acting as
a highly efficient heat sink for superior protection of the servo.
High voltage output: 6A 7.4V BEC with down / regulation system
for stable power to the CCPM server channel for receivers and servos.
Includes a built-in one-button push glow plug igniter eliminating the
hassle of using traditional electric clip plug on igniters. Also
increased external high-frequency filter capacitance to effectively
reduce the interference generated by external noise; such as high-speed
and high torque servos.
MADE IN JAPAN ALIGN Hyper engine for superior 55 size helicopter
●40L dual needle carburetor, makes the adjustment much more precisely.
●Delivers more horsepower for higher rotor speeds.
●Brand new crankshaft design. Increase the efficiency of intake/exhaust
and makes the power stronger.
●Besides good looks and excellent cooling, this engine is machined blue
alumite heat sink head also boosts combustion efficiency for more power
stability.
●Same size connector to the mount and the muffler as what Align 50
Hyper engine has,Maximize the efficiency when operating with ALIGN 50
High Performance Muffler.
An integrated motor mounting bracket allows for efficient heat
dissipation from the motor. The superior Cooling Motor Mount is CNC
from high strength aluminum alloy, and anodized for aesthetically
pleasing appearance.
Dual-sided tail servo mount strengthens the entire frame structure
while allowing for better accessibility when servicing the 600XN.
Brand new strengthened precision design with high-end M4x8 hexagonal
screw upgrade. The new rigid design improves and strengthens the entire
structure enhancing tail performance for all pilots.
Electric equipment
●ALIGN 55H Engine x 1
●ALIGN 50 High Performance Muffler x 1
●DS820M High Voltage Brushless Servo x 3
●DS825M High Voltage Brushless Servo x 1
●DS530 Digital Servo x 1
●B6M 2 In 1 Voltage Regulator x 1
●Governor Sensor x 1RH60N06XW
Specification
●Length: 1152mm
●Height: 356mm
●Width: 189mm
●Main Blade Length: 600mm
●Main Rotor Diameter: 1354mm
●Tail Rotor Diameter: 260mm
●Motor Pinion Gear: 20T
●Main Drive Gear: 170T
●Autorotation Tail Drive Gear: 180T
●Tail Drive Gear: 40T
●Drive Gear Ratio: 8.5:1:4.5
●Fuel Tank Capacity: 440cc.
●Takeoff Weight: 3400g
Accessories
●T-REX 600XN DOMINATOR Set x 1set
●600 Carbon Fiber Blades x 1set
●95mm 3K Carbon Fiber Tail Blades x 1set
●ALIGN 55H Engine x 1
●ALIGN 50 High Performance Muffler x 1
●DS820M High Voltage Brushless Servo x 3
●DS825M High Voltage Brushless Servo x 1
●DS530 Digital Servo x 1
●B6M 2 In 1 Voltage Regulator x 1
●Beastx Governor Sensor x 1