TFR8 8Ch 2.4GHz receiver, Futaba FASST compatible TFR8

TFR8 
8Ch 2.4GHz receiver, Futaba FASST compatible
Ricevente 8CH solo per Radio Futaba 2.4Ghz
Recommended replaceable receiver: TFR8S
FrSky 2.4GHz FAAST compatible 8channel non-telemetry receiver.
SPECIFICATION
Compatibility
FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.
Weight: 13.5g
Case: 53mm*30mm*11mm
Operating Voltage Range: 3.5V~10V
Operating Current: 100mA
Number of Channels: 8
Operating Temperature Range: -10°~60°
Latency: 14ms (FS) 7ms (HS)

Bind procedure:
Turn on the transmitter, connect the battery to the receiver while pressing 
receiver's F/S button.
After the RED LED is off and GREEN LED is solid, the 
binding process is completed and working mode is activated.
Setting failsafe:
TF series receivers support failsafe function for all channels. Please kindly 
follow the steps below to set failsafe:
1) Bind the receiver first, and disable failsafe on the transmitter side;
2) Set failsafe at any required position on any channel;
3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver 
will flash twice, indicating the failsafe is set up successfully.
If you do not need the failsafe function any more, just re-bind the receiver to 
set default failsafe mode.
Warning: Due to different failsafe settings between transmitter and TFR8, 
users must disable failsafe on the transmitter side. Otherwise you will notice a jitter during a 
period of time on the channel you set failsafe.