Parallel Charge Board for JST-XH & HXT 4mm Bullet BIZ-BCA094

Parallel Charge Board for JST-XH & HXT 4mm Bullet
RC parallel charging board
1.Housing:XH FM 2s~6s
2.Wire:12awg L=300mm
3.Balance Wire:JST XH 6S M to M L=200mm
RC parallel charging board

This product is designed to work with a balance charger to charge & balance up to 6 batteries
(including lithium , lipo, life, lion) at the same time. It is simple , reliable ,safe and cheap.

Instruction:
1.Connect the balance lead to the balance socket of your charger and the parallel charging board
2.Connect the power cable of the parallel charging board to the output port of your charger
3. Connect batteries to the parallel charging board always connect the balance leads first, then
connect the power cable. Set the charging voltage & current on your charger by using the following method.
V=V1=V2=V3...=VN( n<=6)
V:charge voltage
V:the charge voltage of each battery
n:the qty of battery

Note:
1. Please make sure to use the same cell number of batteries
2. If the maximum output current of your balance charger is smaller than the I value please set your charger to its
maximum current output.
3. The max current of this parallel charging board is 30A