Naza Controller x Flame Wheel

Naza Controller

Permette l'uso delle Gimbal DJI H3-3D   a differenza della naza Light 

NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a small all-in-one module. It has D-Bus support, upgrade support, and extendible port.

Different from WooKong-M for heavy payloads and aerophotography, NAZA not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience.


Basic Performance:
Supported Multi-rotor Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6
Supported ESC output 400Hz refresh frequency
Recommended Transmitter PCM or 2.4GHz with minimum 4 channels
Working Voltage Range MC:4.8V~5.5V
VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Power Consumption MAX1. 5W (0.3A@5V)
Normal:0.6W (0.12A@5V)
Operating Temperature -10°C ~ 50°C
Assistant Software System Requirement Windows XP sp3 / Windows 7



Flight Performance:
Max Yaw Angular Velocity 200°/s
Max Tilt Angle 45°
Ascent / Descent ±6m/s


Hardware:
Weight MC:25g
VU:20g
Dimensions MC: 45.5mm x 31.5mm x 18.5mm
VU: 32.2mm x 21.1mm x 7.7mm
Built-In Functions Three Modes Autopilot
Enhanced Fail-safe
Low Voltage Protection
S-Bus Receiver Support
2-axle Gimbal Support

Consigli uso :

     
Please be informed that during the NAZA-M initialization process, 3 green
flash or 4 green flash is same which indicate initialization
succeeded....
        In the next firmware this initialization process will
be unified as 4 green flash.

Si informa che nel corso del NAZA-M processo di inizializzazione, 3 verde flash o 4 verde flash è lo stesso che indicano l'inizializzazione è riuscito ....
         Nel prossimo firmware questo processo di inizializzazione saranno unificate come 4 flash verde.